The installation of your new seat with Loglows is simple. But first we need to get the formalities out of the way.
- Lights are for off road use only; please check your local and state laws for the proper use of this product.
- Improper installation of electricity-using products such as lighting may cause damage to any vehicle or device to which the improperly handled or installed lighting is attached.
- Improperly installed product may cause electrical injury to persons.
- It is recommended that the seat be installed by a licensed professional.
- DD Custom Seats/Loglows assumes no liability for the installation of the product
- You may add the lights to existing lights on your motorcycle, if this is the case just remember that the wire with the white stripe is your positive lead and the other is your ground. This is important because LED will not function with polarity reversed.
- OR you may go to your local auto parts store and get a simple push button switch. Connect you positive lead to the switch and the switch to the postive terminal of your battery. Then connect the ground to the ground terminal.
